EV Charging Gun & Charging Pile Cable — GB/T 33594-2017 450/750 V Modified PVC Cable with Oxygen-Free Copper Conductors, 3-Core and 5-Core Plus Auxiliary Core, −50 °C to +125 °C
Kabely pro Nabíjení EV a Obnovitelné Energie /EV Charging Gun Cable

EV Charging Gun & Charging Pile Cable — GB/T 33594-2017 450/750 V Modified PVC Cable with Oxygen-Free Copper Conductors, 3-Core and 5-Core Plus Auxiliary Core, −50 °C to +125 °C

EV charging gun and charging pile cable to GB/T 33594-2017: 450/750 V, modified PVC insulation and sheath, oxygen-free copper, −50 °C to +125 °C, 3-core and 5-core.

Hlavní Vlastnosti

Built to GB/T 33594-2017 — the Chinese national standard for charging cables for electric vehicles, which is the specification a domestic charging pile or charging gun project will be inspected against
450/750 V rating — the voltage class of an AC charging connection, distinct from a 0.6/1 kV distribution cable; the insulation is sized for the charging circuit rather than for a substation run
−50 °C to +125 °C — the wide range covers a charging post in an unheated outdoor car park in winter and a cable lying in summer sun, and the sheath stays soft at the low end
99.999% oxygen-free copper conductor — a high-purity conductor keeps the resistance low, so the cable does not run hot at the connector, which is where a charging cable is usually handled
Modified PVC insulation and sheath — the compound is a new environmentally friendly material, flame retardant, and self-extinguishing once the flame is removed, with no irritating odour
Continuous oil immersion — the cable remains soft after 60 days of immersion in oil, which covers a workshop or a service bay where the cable lies on an oily floor
Thirteen core configurations from 3×1.5+1×0.75 to 5×6+2×0.75 — the range covers single-phase and three-phase charging connections, with a small auxiliary core alongside the power cores
Flexible, tensile-resistant sheath — the cable is built to be dragged and coiled by the user rather than fixed in a tray, so the jacket resists abrasion and does not crack at the bend

Použití

AC charging piles — the tethered cable from the charging post to the vehicle connector on a domestic or commercial AC chargerEV charging guns — the cable assembly behind the charging connector, where the cable is handled and coiled by the driverNew energy vehicle wiring — charging circuit and auxiliary power wiring inside the vehicleMotor drive units — power wiring to the motor driver in new energy vehicles and equipmentSpecial equipment control wiring — control circuits in new energy equipment where a flexible 450/750 V cable is specifiedWorkshop and service bay charging — portable and semi-portable charging connections where the cable lies on the floor and is exposed to oil

Technické Specifikace

Product Type EV charging gun and charging pile cable
Standard GB/T 33594-2017
Rated Voltage 450/750 V
Conductor Material Oxygen-free copper, 99.999% purity
Insulation Modified PVC, environmentally friendly compound
Sheath Modified PVC, environmentally friendly compound
Temperature Range −50 °C to +125 °C
High Temperature Behaviour Does not burn under direct flame; self-extinguishing when the flame is removed
Low Temperature Behaviour Sheath remains soft at −50 °C
Oil Resistance Remains soft after 60 days of immersion in oil
Chemical Resistance Abrasion resistant, acid and alkali resistant, anti-ageing
Mechanical Properties Flexible, tensile resistant, resistant to repeated bending
Eccentricity Low eccentricity, even sheath wall to prevent breakdown
Core Configurations 3×1.5+1×0.75, 3×4+1×0.75, 3×6+1×0.75, 3×1.5+2×0.75, 3×2.5+2×0.75, 3×4+2×0.75, 3×6+2×0.75, 5×2.5+1×0.75, 5×4+1×0.75, 5×6+1×0.75, 5×2.5+2×0.75, 5×4+2×0.75, 5×6+2×0.75 (mm²)
Marking Clear inkjet printing with metre marking on the sheath
Certifications CCC (3C), RoHS
Packing 100 m or 200 m per coil with certificate; lengths below 100 m supplied as measured cut lengths
Application Charging piles, charging guns, new energy vehicles, motor drivers, special equipment control wiring

Podrobný Popis

What a Charging Gun Cable Has to Do That a Power Cable Does Not

A charging gun cable is handled. It is dragged across a car park floor, coiled over a hook, dropped on concrete, and pulled out of a connector by a driver in a hurry. A fixed power cable never sees that duty, and the difference shows up in the two properties that dominate the design: flexibility and resistance to abrasion.

The electrical requirement is modest by comparison. The cable is a 450/750 V connection between the charging post and the vehicle, not a 0.6/1 kV distribution cable. What sets this cable apart is that it has to survive the handling while staying electrically sound — and it has to do that while remaining soft enough to coil at −50 °C.

The construction is built to GB/T 33594-2017, the Chinese national standard for charging cables for electric vehicles.

Construction: Oxygen-Free Copper, Modified PVC, and the Wide Temperature Range

The cable is built in four layers, and the compound choice on the last two is what delivers the temperature range:

  • Conductor — oxygen-free copper at 99.999% purity. The high-purity conductor keeps the resistance low, and a low-resistance conductor runs cooler at the connector, which is the part of a charging cable that a hand actually touches.
  • Insulation — modified PVC, a new environmentally friendly compound. The modification is what raises the temperature ceiling above that of a standard PVC while keeping the compound flame retardant and free of irritating odour when it burns.
  • Filler — a filler element keeps the core assembly round and concentric, so the sheath wall stays even.
  • Sheath — modified PVC, applied at a low-eccentricity wall. An even wall is what prevents the thin spot that becomes the breakdown point when the cable is bent repeatedly.
Two properties come from the sheath compound rather than from the copper: resistance to oil, and flexibility at low temperature. The cable remains soft after 60 days of immersion in oil, and the sheath does not harden at −50 °C.

Core Configurations

Configuration (mm²)Configuration (mm²)Configuration (mm²)
3×1.5+1×0.753×4+1×0.753×6+1×0.75
3×1.5+2×0.753×2.5+2×0.753×4+2×0.75
3×6+2×0.755×2.5+1×0.755×4+1×0.75
5×6+1×0.755×2.5+2×0.755×4+2×0.75
5×6+2×0.75——

The 3-core builds suit a single-phase charging connection, and the 5-core builds suit a three-phase connection. Each configuration pairs the main power cores with one or two smaller auxiliary cores at 0.75 mm²; the function of that core follows the connector wiring rather than the cable alone, so it is confirmed against the connector design.

The GB/T 33594-2017 Standard

The standard is the part that is easy to overlook and hard to fix later. It sets the construction and the test regime for a charging cable, and a domestic charging pile project is generally inspected against it. A cable built to a different national standard may perform the same function and still be rejected at inspection, because the acceptance criterion is the standard named in the project specification.

The cable also carries CCC and RoHS. CCC is the domestic market mark; for an export project, confirm which certification the destination market requires before the order is placed.

Ordering and Delivery

The range is built rather than limited to a fixed stock list, so a configuration outside the thirteen listed above can be produced to requirement. The jacket carries clear inkjet printing with metre marking, so the installed length can be read from the cable.

Standard supply is a 100 m or 200 m coil with a certificate, and lengths below 100 m as measured cut lengths. The inkjet printing on the sheath carries the product designation as well as the metre marking, so a partly used coil can still be identified by the cable type rather than by the label on the reel.

To specify the cable, four items decide the build: the number of power cores and the phase arrangement, the conductor cross-section, the connector type at each end, and the operating temperature at the installation point. Send them through the enquiry form on this page, together with the standard the project is inspected against, and the configuration is confirmed against those inputs.

Často Kladené Otázky

What does GB/T 33594-2017 cover, and why does it matter for a charging cable?

GB/T 33594-2017 is the Chinese national standard for charging cables for electric vehicles. It sets the construction, the insulation and sheath requirements, and the test regime for a cable used between a charging post and a vehicle. A domestic charging pile project is normally inspected against it, so a cable certified to a different standard may not be accepted on site even if it performs the same function.

Why is this cable 450/750 V when a charging station supply cable is 0.6/1 kV?

They are different positions in the circuit. This cable is the flexible connection between the charging post and the vehicle, and 450/750 V is the class for that connection. The 0.6/1 kV cable is the fixed distribution cable feeding the charging station from the switchboard. A charging installation uses both, and they are not interchangeable.

What is the small auxiliary core in each configuration for?

Each configuration pairs the main power cores with a smaller core — 0.75 mm² in the listed builds — which carries an auxiliary function in the charging connection. Which function it serves depends on the connector and the charging system design, so the core assignment is confirmed against the connector wiring rather than assumed from the cable alone.

Can the cable be used outdoors in winter?

Yes. The sheath is rated to −50 °C and stays soft at that temperature, which matters for an outdoor charging post where the cable is coiled and uncoiled by the user in freezing weather. A sheath that hardened at low temperature would crack at the bend.

Which configurations are available?

Thirteen builds are listed, from 3×1.5+1×0.75 up to 5×6+2×0.75, covering single-phase and three-phase charging connections. Other configurations can be produced to customer requirement, since the range is built rather than stocked in fixed lengths only.

Poptávka Produktu

Produkt: EV Charging Gun & Charging Pile Cable — GB/T 33594-2017 450/750 V Modified PVC Cable with Oxygen-Free Copper Conductors, 3-Core and 5-Core Plus Auxiliary Core, −50 °C to +125 °C

Přidat technické specifikace (volitelné)

Čím podrobnější informace nám poskytnete, tím rychleji a přesněji připravíme nabídku.

Není vybrán žádný soubor

Soubor PDF, Office, obrázek nebo CAD — až 5 MB

Potřebujete Pomoc?

Certifikace

ISO 9001
Kvalita
CE
Evropská
RoHS
Environmentální
TÜV
Certifikace

Potřebujete Nabídku pro Tento Produkt?

Pošlete nám své požadavky a obdržíte podrobnou nabídku do 24 hodin.