EVRP Shielded EV High Voltage Cable — 1500 V Single-Core Cable with Tinned Copper Braid and Aluminium Foil Screen, XLPE Sheath, 2.5 to 150 mm², −40 °C to +125 °C, Orange or Black
Kabely pro Nabíjení EV a Obnovitelné Energie /EV High Voltage Shielded Cable

EVRP Shielded EV High Voltage Cable — 1500 V Single-Core Cable with Tinned Copper Braid and Aluminium Foil Screen, XLPE Sheath, 2.5 to 150 mm², −40 °C to +125 °C, Orange or Black

EVRP shielded EV high voltage cable: 1500 V single-core, tinned copper braid plus aluminium foil screen, XLPE sheath, 2.5 to 150 mm², rated −40 °C to +125 °C.

Hlavní Vlastnosti

Two screen layers — an aluminium foil layer plus a tinned copper braid, so the cable blocks the electrostatic field and carries the induced screen current, which a foil-only or braid-only cable cannot do at the same time
1500 V single-core construction — the voltage class used for the traction battery and charging inlet circuits, in one insulated core rather than a multi-core assembly
Cross-sections from 2.5 mm² to 150 mm² — the range runs from a control-level conductor to a main pack cable, so the same cable type serves the whole high voltage harness
XLPE sheath rated −40 °C to +125 °C — the cross-linked compound holds its dielectric strength and its flexibility at both ends of the range
99.999% oxygen-free copper conductor — a high-purity conductor keeps the resistance low and the conductor temperature rise small at high current
Continuous oil immersion — the cable remains soft after 60 days of immersion, which covers a driveline bay or an underbody route exposed to lubricant and road chemicals
Self-extinguishing — the cable does not burn at its 125 °C rating and extinguishes when the flame is removed, with no pronounced odour
Low eccentricity insulation — an even wall around the conductor removes the thin spot that becomes the breakdown point under the impulse voltage of a traction inverter

Použití

Charging inlet to battery — the high voltage path from the vehicle charging socket to the packInside the battery pack — module and string interconnection where the route passes close to switching electronicsBattery to motor and other components — the main traction power path and the connections to the inverter, the PTC heater, and the DC-DC converterCharging pile internal wiring — high voltage connections inside a DC charging cabinetEnergy storage cabinets — battery string wiring where the screened cable is required by the EMC designHigh-interference routing — any high voltage run that shares a route with a motor phase cable or a drive output

Technické Specifikace

Product Type EV high voltage single-core cable, shielded
Type Designation EVRP
Screening Aluminium foil layer plus tinned copper braid, two layers
Rated Voltage 1500 V
Cross-Section Range 2.5 mm² to 150 mm²
Standard Sizes 1×2.5, 1×4.0, 1×6.0, 1×10, 1×16, 1×25, 1×35, 1×50, 1×70, 1×95, 1×120, 1×150 mm²
Conductor Material Multi-strand high-purity oxygen-free copper, 99.999%
Insulation and Sheath XLPE (cross-linked polyethylene)
Temperature Range −40 °C to +125 °C
Low Temperature Behaviour Cable remains soft at −40 °C without hardening
High Temperature Behaviour Does not burn at 125 °C
Flame Behaviour Self-extinguishing when the flame is removed; no pronounced odour
Oil Resistance Suitable for continuous immersion in oil; does not harden or crack
Immersion Test Remains soft after 60 days of immersion
Chemical Resistance Oil resistant, acid and alkali resistant, water resistant, UV resistant
Mechanical Properties Flexible, bend resistant, abrasion resistant, crack resistant, tensile resistant
Eccentricity Low eccentricity, even insulation wall to prevent breakdown
Standard Colours Orange and black; other colours customizable
Marking Metre marking and product designation printed on the sheath
Certifications IATF 16949 (automotive quality management system)
Packing 100 m per coil; lengths below 100 m supplied as measured cut lengths
Application Charging inlet to battery, battery internal interconnection, battery to motor and auxiliary components, charging pile internal wiring, energy storage cabinets

Podrobný Popis

Why an EV High Voltage Cable Needs a Screen

A traction battery cable does not run through a quiet environment. It runs beside motor phase cables, past an inverter switching at tens of kilohertz, and often inside a pack that also contains the battery management electronics. In that environment an unscreened conductor is an antenna: the switching field couples into it, and the induced voltage appears as noise wherever that circuit is measured.

A screen gives the interference a defined path to ground instead of letting it ride on the conductor. The screen is not there for safety and it does not carry load current — it carries the induced current, which is why its impedance to ground has to stay low along the entire run.

EVRP is the screened version of the EVR high voltage cable: same 1500 V class, same XLPE sheath, with two screen layers added.

Construction: Two Screen Layers Over XLPE

The build runs from the conductor outward, and the two screen layers are the reason this cable exists:

  • Conductor — multi-strand oxygen-free copper at 99.999% purity. The high purity keeps resistance low, which keeps the conductor temperature rise small at high current and the voltage stable at the far end.
  • Insulation — XLPE, applied at a low-eccentricity wall. The evenness matters more here than on a distribution cable: the impulse voltage from a traction inverter finds the thin spot of an eccentric extrusion first.
  • Foil screen — an aluminium foil layer, wrapped 360° around the insulated core. It is the electrostatic barrier, continuous along the length with no braid gap.
  • Braid screen — a tinned copper braid over the foil. It carries the induced screen current and provides the low-resistance path to ground; the tinning keeps that path stable as the braid ages.
  • Sheath — XLPE, rated 125 °C. It holds the assembly together and provides the oil, water, and UV resistance.

Ratings and Cross-Section Range

ParameterValue
Rated voltage1500 V
ScreenAluminium foil + tinned copper braid
Cross-section range2.5–150 mm²
Standard sizes1×2.5 to 1×150 mm²
ConductorOxygen-free copper, 99.999%
Insulation and sheathXLPE
Temperature range−40 °C to +125 °C
Flame behaviourSelf-extinguishing, no burning at 125 °C
Oil resistanceContinuous immersion
Immersion testSoft after 60 days
Standard coloursOrange, black
Standard length100 m per coil
CertificationIATF 16949

The twelve standard sizes run from 2.5 mm² to 150 mm² in single-core construction. The smaller sizes are used for control and auxiliary high voltage circuits, and the larger sizes for the main pack and inverter feeds.

Where EVRP Fits in the Vehicle

The cable is used on four routes, all of which share a characteristic: the conductor is close to something that switches.

  • Charging inlet to battery — the run from the vehicle socket to the pack, which passes close to the on-board charger.
  • Inside the battery pack — module and string interconnection, in a space shared with the battery management electronics.
  • Battery to motor and auxiliary components — the main traction path and the feeds to the inverter, the PTC heater, and the DC-DC converter.
  • Charging pile and storage cabinet wiring — DC charging cabinets and battery storage cabinets where the EMC design calls for a screened conductor.

Colours, Lengths, and Ordering

Orange and black are standard, with other colours available on request. Orange is the conventional high voltage identification colour in a vehicle harness, and it is the colour that a service technician is trained to treat as live.

Supply is a 100 m coil, with lengths below 100 m as measured cut lengths. The sheath carries metre marking, so the installed length can be read from the cable.

The cable is produced under an IATF 16949 quality management system, which is the automotive sector requirement for a component supplier. Where a project requires a product certificate beyond the quality system, state the destination market with the enquiry.

To specify EVRP cable, four items decide the build: the cross-section, the circuit voltage and whether it is AC or DC, the maximum temperature at the installation point, and the route length. Send them through the enquiry form on this page and the build is confirmed against them.

Často Kladené Otázky

Why does a high voltage EV cable need a screen at all?

Because an unscreened conductor behaves as an antenna. A traction system switches at high frequency, and the cable runs alongside motor phase cables and drive outputs. Without a screen, that field couples into the high voltage conductor and appears as noise on the measurement and control circuits that share the harness. The screen gives the interference a low-resistance path to ground instead.

What are the two screen layers each doing?

The aluminium foil is a continuous 360° electrostatic barrier, and the tinned copper braid carries the screen current and handles the magnetic component. Foil alone has too little cross-section to carry the induced current; braid alone leaves gaps between the wires. The pair covers both mechanisms, and the tinning on the braid keeps the ground path stable over time.

When should I use EVRP instead of the unscreened EVR cable?

Use EVRP wherever the route shares space with a switching source: alongside a motor phase cable, near an inverter output, inside a charging cabinet, or in a pack where the EMC design requires a screened conductor. The unscreened EVR is the lighter and more flexible option where the route is in a benign field, such as a short DC link inside its own enclosure.

Which cross-sections and colours are available?

The range covers 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120, and 150 mm² in single-core construction. Orange and black are standard, and other colours can be customized. Orange is the conventional high voltage identification colour in a vehicle harness.

How is the cable supplied?

Standard supply is a 100 m coil, with lengths below 100 m as measured cut lengths. The sheath carries metre marking, so a cut length can be verified on site. The cable is produced under an IATF 16949 quality management system; where a product certificate is required beyond the quality system, state the market with the enquiry.

Poptávka Produktu

Produkt: EVRP Shielded EV High Voltage Cable — 1500 V Single-Core Cable with Tinned Copper Braid and Aluminium Foil Screen, XLPE Sheath, 2.5 to 150 mm², −40 °C to +125 °C, Orange or Black

Přidat technické specifikace (volitelné)

Čím podrobnější informace nám poskytnete, tím rychleji a přesněji připravíme nabídku.

Není vybrán žádný soubor

Soubor PDF, Office, obrázek nebo CAD — až 5 MB

Potřebujete Pomoc?

Certifikace

ISO 9001
Kvalita
CE
Evropská
RoHS
Environmentální
TÜV
Certifikace

Potřebujete Nabídku pro Tento Produkt?

Pošlete nám své požadavky a obdržíte podrobnou nabídku do 24 hodin.