Gedetailleerde Beschrijving
Why an Elevator Video Cable Is Not an Ordinary CCTV Cable
A lift camera does not sit still. It travels with the car, several hundred times a day, through a hoistway that has a fixed amount of space for the cable to fold into. That changes two things about the cable: it has to bend repeatedly in a controlled plane, and it has to hang from something other than its own conductors.
This is why the elevator coaxial traveling cable is built flat. The two configurations measure 6.4 mm × 14 mm and 6.8 mm × 17.9 mm, and two 1.0 mm steel wires run alongside the cores for the full length. The steel wires take the hanging weight; the coaxial core and the optional power pair carry only signal and current.
The video core itself is SYV75-5 — a coaxial construction with a solid polyethylene dielectric and an oxygen-free copper centre conductor, the format used for analogue CCTV and composite video.
Construction: Coaxial Core, Power Cores, and the Two Steel Wires
The assembly is built from four element groups, and each has a job that the others cannot do:
- Video core — SYV75-5 coaxial, with a solid polyethylene dielectric. The solid dielectric holds a constant geometry along the length, which is what keeps the signal stable over a long hoistway run.
- Power pair (optional) — RVV 2 × 0.75 mm², insulated in flame retardant PVC. It supplies the camera in the same flat jacket, so the installation is one drop rather than two.
- Shield — aluminium foil plus a 128-wire braid. The foil layer blocks electrostatic coupling; the braid handles the lower-frequency magnetic field generated by the hoist motor and its drive.
- Strain relief — 2 × 1.0 mm steel wire. These are the tensile members, anchored at the fixed points so the copper cores never carry the cable's own weight.
- Jacket — a flexible PVC compound in grey, selected for repeated bending as the car travels. It recovers its shape after the bend instead of taking a permanent set, which is what keeps the flat profile folding correctly in the hoistway.
Flat Dimensions and Configuration Options
| Item | Video + 2 steel wires | Video + power + 2 steel wires |
|---|---|---|
| Video core | SYV75-5 | SYV75-5 |
| Power core | — | RVV 2 × 0.75 mm² |
| Shield | Foil + 128-wire braid | Foil + 128-wire braid |
| Strain relief | 2 × 1.0 mm steel | 2 × 1.0 mm steel |
| Height | 6.4 mm | 6.8 mm |
| Width | 14 mm | 17.9 mm |
| Jacket | Flexible PVC, grey | Flexible PVC, grey |
The two configurations differ only by the power pair. The width grows from 14 mm to 17.9 mm and the height from 6.4 mm to 6.8 mm, which is the space the second pair occupies in the same flat jacket.
Routing in the Hoistway
The flat profile is the reason this cable works in the space available. It bends in one plane, so the travelling loop folds predictably rather than twisting. A round bundle of the same core count tends to rotate as it hangs, and that rotation loads the conductors instead of the steel wires.
Two points decide the installation:
- Fix the steel wires, not the cores. The tensile members are what the cable hangs from. The anchoring at the car end and at the fixed end is made on the steel wires, so the copper and the shield are never the load path.
- Keep the bend in the flat plane. The profile is designed to bend across its width. Bending it the other way, out of the flat plane, works against the steel wires and shortens the service life of the jacket.
Certification and Ordering
The cable is built to national standard (GB) construction and carries CCC, RoHS, and ISO 9001. CCC is the relevant mark for the Chinese domestic lift market; for export projects, confirm which certification the destination market requires before the order is placed, since the mark on the jacket follows the market rather than the construction.
Standard supply is a 100 m or 200 m coil with a certificate. Lengths below 100 m are supplied as measured cut lengths, and because the jacket is printed with metre marking, a cut length can be verified on site.
To specify the cable, the two decisions are the configuration and the total travelling length: video only, or video plus the 2 × 0.75 mm² power pair. Send the hoistway length, the camera supply requirement, and the fixing arrangement through the enquiry form on this page, and the assembly is quoted against those three inputs.